How To Create Bright Lighting

Introduction – Create a Bright Feeling With Your Lighting Design

Create unforgettable designs for your clients. This guide breaks down how to create a bright lighting for your project, through practical strategies for architects and interior designers. Let’s get started …

Table of Contents

• Bright Vibe
• Bright Lighting Layout
• Bright Lighting Calculation
• Bright Lighting – Project Example
• What to Look For In a Quality Light
• Color Rendering Index
• Dimmer Compatibility
• Why Is It Important to Do A Lighting Calculation?
• Works Cited

Create a Feeling With Light: Bright Vibe

VIBE: Clean, expansive, ordered.

LIGHTING STRATEGY: Most of the light in this room needs to be aimed at the walls, to make the space “feel” bright. 

ROOM FINISHES: Walls and ceilings should be bright tones. Matte finishes are recommended because they will appear brighter than finishes which are glossy.

Creating a Bright Lighting Layout

It’s boring. It’s predictable. And I love it. Make it BRIGHT! I use this vibe on virtually every project I work on because it’s a crowd pleaser.

Of course you want your spaces to FEEL bright, and the key here is to focus light on vertical surfaces. You need to get light onto the walls, cabinets, and artwork to make a space feel bright.

Shocker installing a whole bunch of recessed cans is NOT going to make your room feel bright, because those cans are pointed downward at the floor. If your floor is white, then you get a free pass, but for everyone else, you’re throwing money away when you point lights at dark surfaces, like … floors.

If you’re drawing a grid of recessed cans for your lighting plan, PLEASE make some of those adjustable lights that can be aimed at walls. Your eyes will thank you. Check out our template to get started.

How Many Lights for a Bright Lighting Design?

To figure out how much illumination is needed for the whole room, we can do a quick calculation. It only takes a couple minutes. First follow the link to our bright lighting estimator here.

Example Bright Lighting Calculation

Bright Lighting Project Example

COLUMBIA CITY ABBY

Architect: Allied8 | Lighting Designer: Steve Duncan

THE BLAKE

Architect: Devi Dutta Architecture | Lighting Designer: Steve Duncan

WHIDBEY ISLAND HOME

Architect: Allied8 | Lighting Designer: Steve Duncan

What to Look for in a Quality LED Light – Bright Vibe

Regardless of the vibe you are going for, there are two things that can trip up designers when they are selecting LED lighting: ​

COLOR RENDERING INDEX (CRI)

If you only remember one thing from me, please remember that color rendering is EVERYTHING when it comes to lighting. If you love incandescent and halogen lights, but hate fluorescent, then color rendering is the reason.​

We always want to find lights that have a color rendering (CRI) of at least 90, so that we can bring out the true color of our room finishes and decor. Many LED lights have a color rendering of 80, and this score is actually worse than fluorescent (which has a score of 82). As you can see in the image below, the true color of the wood is brought out with the light on the right, which has a score of 90. The red tones of the wood come through and it feels warm. In contrast, the light on the left makes the wood look a bit greenish and yellow, because it has a poor color rendering score of 80.​

Trust me! It’s worth it to spend just a little bit more on lights to make sure that you’re getting LEDs with a score of 90 or higher, so that the people and finishes in your spaces feel vibrant and full of life. Make sure to pay attention to this when you find a light you like and you’re ready to hit that “order” button.

DIMMER COMPATIBILITY

Lastly, make sure that the LEDs you select are dimmable. This is something you need to check in the product cut sheet or through the web store that you are browsing. ​

Also, you’ll need to make sure that the dimmer you select will be compatible with the LED light fixture.  In the past, we could easily dim incandescent and halogen lighting with a simple rotary dimmer. This may or may not work for a new LED light fixture.  

You wouldn’t expect your television remote to be able to turn on your stereo system, would you? The same is true for LED dimmers. You have to make sure that the dimmer switch can actually communicate with the light fixture.  

There’s a variety of dimming protocols: it may be TRIAC, Electronic Low Voltage (ELV), 0-10 Volt, or DALI. So make sure to work with your electrician or a sales representative to make sure that the components of your lighting design are all compatible. 

Why it is Important to do a Lighting Calculation for a Bright Vibe?

If you want to be confident in your lighting design, you have to do a lighting calculation. It’s as simple as that. ​

But how do we actually estimate how bright a room actually needs to be? Well, the footcandle targets for a room are set by the Illuminating Engineering Society of North America (IESNA), and the International Association of Lighting Designers (IALD). This professional organization has studied and analyzed the functional requirements for each kind of space designed by architects. For residential projects, I like to refer back to the National Renewable Energy Laboratory & Department of Energy’s footcandle targets, since those are made freely available to the public. These are the targets I use for my own projects, and are the basis for the lighting estimator on this webpage. ​

You don’t want to have too little light. It’s expensive for a contractor and electrician to come back after the fact to revise the lighting strategy and patch the walls/ceiling. This happened to an interior designer early in my career, and it wasn’t a fun situation. For me, it was the beginning of a great collaboration with this design professional, because we worked on many projects after that – but of course it would have been better if this interior designer hadn’t made that mistake to begin with. ​

Likewise, you also don’t want to be too bright, and overspend on lighting, just because you’re unsure what is needed and just hoping for the best (yikes!). 

This is fundamentally why I created lighting estimators – to balance making sure there’s enough light, while also making sure a client isn’t paying for too many lights. Hopefully using the calculator was straightforward. Reach out with questions (before buying/building anything), if you’d like help! Good luck on your project!​​

-Steve Duncan, AIA​

Architect & Lighting Designer

Works Cited – Bright Vibe

Duncan, Steve. “Why Is It Important to Do a Lighting Calculation?” Lighting Design Insights. [LightingJUMP.com, https://www.lightingjump.com/how-many-lights-cinematic-vibe]. 

The author emphasizes the necessity of conducting lighting calculations to ensure effective lighting design in various spaces. He cites the Illuminating Engineering Society of North America (IESNA) and the International Association of Lighting Designers (IALD) for their established footcandle targets that help determine appropriate lighting levels. Duncan also mentions the National Renewable Energy Laboratory (NREL) and the Department of Energy’s publicly available footcandle targets, which he uses for residential projects. He shares a personal anecdote about the complications that arise from inadequate lighting, stressing the importance of precise calculations to avoid costly adjustments and excessive spending. The lighting estimator featured on his webpage is designed to assist clients in achieving optimal lighting without overspending.

REFERENCES

International Association of Lighting Designers. “About the IALD.” https://iald.org/IALD/IALD/About/About-the-IALD.aspx?hkey=104e951f-5da0-4cb8-8ca8-8cce8a7b4caf.

Duncan, Steve. “Why Is It Important to Do a Lighting Calculation?” Lighting Design Insights.

National Renewable Energy Laboratory. “Light Emitting Diodes (LEDs) in Residential Lighting.” NREL/TP-53467. 2012. https://www.nrel.gov/docs/fy12osti/53467.pdf.

Illuminating Engineering Society. “Standards.” https://store.ies.org/individual-standards/?v=0b3b97fa6688.